Gas Cutting Products – Creative

KING JOIN – AGHT / HT-1

admin — Sat, 01 Oct 2016 10:04:26 +0000

KING JOIN – AGHT / HT-1

KEY FEATURES :

Torch designed to use with LPG gas.
Torch is designed with safety purpose to give dependable performance.
3 sizes of heating nozzles are provided with this torch.

KING JOIN – AGWT / 25W

admin — Sat, 01 Oct 2016 10:06:15 +0000

KING JOIN – AGWT / 25W

KEY FEATURES :

This balanced blowpipe is for versatile applications using Oxygen and Acetylene gases. It is most suitable for Gas welding and Brazing applications in general workshops and welding shops of large organisations.
Torch is designed with safety purpose to give dependable performance. Only 5 tips are able to cater for Gas Welding / Brazing from 0.8 mm to 6 mm thick plates. These are swaged copper tubes.
This is a better engineered safety product designed to give dependable protection against backfire. This blowpipe has been designed as all metallic from outside.

KING JOIN – AGWT / 3W

admin — Sat, 01 Oct 2016 10:03:12 +0000

KING JOIN – AGWT / 3W

KEY FEATURES :

This Is A Well Balanced Blowpipe For Versatile Applications Using Oxygen & Acetylene / LPG Gases.
Best Suitable For Gas Welding / Brazing From 0.5 Mm To 3mm Thick Plates. Torch Is Designed With Safety Protections To Give Dependable Performance Against Backfire.
5 Tips (LPG) Are Supplied As A Standard Scope Along With Torch For Gas Welding / Brazing Applications.
Torch Can Be Used With Both Oxy-LPG As Well As Oxy-acetylene Gases.

KING PROTECT – FLASHBACK ARRESTOR FOR TORCH

admin — Sat, 01 Oct 2016 10:10:32 +0000

KING PROTECT – FLASHBACK ARRESTOR FOR TORCH

Applications

King Protect – T/O – Flashback Arrestor For Oxygen Gas – Torch Mounted
King Protect –T/A – Flashback arrestor for fuel gas – Torch Mounted
Flashback arrestors for reliable protection against dangerous reverse gas flows and flashbacks.
Every flashback arrestor is 100% tested.

APPROVALS
ISO 9001 EN 730-1 ISO 5175

KEY FEATURES

The flashback arrestors are installed at the inlet of the blowpipe.
A large surface area flame arrestor constructed of stainless steel extinguishes any dangerous flash- backs entering the device from any direction.
A spring loaded non-return valve prevents slow or sudden reverse gas flow which could form explosive mixtures in the gas supply.

KING PROTECT R – FLASHBACK ARRESTOR FOR REGULATOR

admin — Sat, 01 Oct 2016 10:11:30 +0000

KING PROTECT R – FLASHBACK ARRESTOR FOR REGULATOR

Applications :

Flashback Arrestors are used to protect gas cylinders and pipeline outlet points (hoses and any equipment) against dangerous reverse gas flow and flashbacks.
For pipeline outlets and single cylinders.
The maximum ambient / working temperature is 70°C / 158°F

Key Features :

A large surface area flame arrestor of stainless steel construction extinguishes any dangerous flashback entering the device in any direction.
A temperature sensitive cut-off valve extinguishes sustained flashbacks long before the internal temperature of the arrestors reaches a dangerous level.
A spring loaded non-return valve prevents slow or sudden reverse gas flow forming explosive mixtures in the gas supply.
A filter at the gas inlet protects the arrestor against dirt contamination, extending the service life

KING REGULATOR SERIES

admin — Sat, 01 Oct 2016 10:09:36 +0000

KING REGULATOR SERIES

Two Stage Gas Regulators

KEY FEATURES :

Stainless steel diaphragm in first stage to absorb shock of inlet pressure up to 230 bar. Flexible rubber diaphragm in second stage for fine gas control
Forged brass bonnet in first stage and die cast special alloy bonnet in second stage for higher strength.
Plastic moulded valve and stainless steel spindle in the valve assembly capsule in both stages for leak-proof performance.
Distinctive colour for bonnet, pressure gauge and pressure adjusting knobs.
Second stage plenum chamber volume is six times than first stage ensuring very stable flow characteristics.
Double protection through separate safety valves in first and second stage.
Triple filter: one in inlet and two wire mesh in the valve assembly protect the sensitive internal parts from any dust particles. Weight 2.40 Kg.

Single Stage Gas Regulators

KEY FEATURES :

Unbreakable moulded pressure adjusting knob.
Unique profile rubber diaphragm.
Stainless steel machined & ground valve spindle with hard plastic moulded valve at the heart of the regulator.
Sintered filter in the inlet, wire mesh filter in alve assembly.
Side inlet for horizontal cylinder valve
Self-adjusting safety valve.
Weight 1.10 Kg approx.

KING TORCH – NM

admin — Sat, 01 Oct 2016 10:05:24 +0000

KING TORCH – NM

Specifications :

Maximum cutting thickness: 300 mm
Length of torch: 470 mm
Weight of torch: 1.3 kg
Manufactured as per IS: 7653 – 1975 and Certified by Bureau of Indian Standards. Marked with ISI and certification license number CM/L 7226061

KEY FEATURES :

King Cutting Torch has several advantages owing to its nozzle mix system. King Cutting Torch is available with ANM nozzle for use with Acetylene as fuel gas and PNM nozzle for use with LPG as fuel gas.
NOZZLE–MIX CUTTING IS SAFEST: King Cutting Torches unique “positivesuction” NM nozzles are designed according to the fuel gas being used, to safeguard the torch and operator from “sustained backfire” or “flashback”. This is especially advantageous when different fuel gases are used on the same shopfloor. WIDER RANGE OF OPERATION: King Cutting Torches can be employed for a wide range of cutting jobs. All you need is to change the nozzle to suit the job.
EASY MAINTENANCE: The all metal design makes KING NM a rugged torch that can withstand rough handling by shopfloor workers.

PANTHER NM

admin — Sat, 01 Oct 2016 09:41:41 +0000

PANTHER NM

KEY FEATURES :

No backfire during cutting because of “Nozzle-Mix” technology.
Aluminium die cast body with ventilation holes reduces overheating of motor and other electrical parts.
Unbreakable, smooth and precise horizontal and vertical adjustment of torch.
Bevel setting with locking facility means bevel accuracy during long cutting.
Remote mounted gas control knobs make flame adjustment during cutting operation easy.
Single lever ON-OFF control for cutting Oxygen makes the stopping and restarting of cutting very easy and saves Oxygen.
Stainless steel heat reflectors (2 nos. with air gap), protect the motor from heat during cutting thus adding to the life of the machine.
Travels on standard 1.8 mtr extruded Aluminium rail.

BRIEF SPECIFICATIONS :

Cutting Capacity : 100 mm of mild steel with NMC-100S torch.
Straight Cut : In 1.8 mtr length or multiples by adding rails.
Circle Cutting : 150 to 1200 mm diameter.
Bevel Cuttimg : Up to 45 degrees.
Cutting Speed : 100 t0 1000 mm/min
Power Supply : 220/240 V, 1ph, 50 Hz.
Weight : 10.8 kg. approx.
Overall Dimension : 420 mm L x 280 mm W x 450mm H (approx).
Horizontal Adjustment of Torch : 80 mm.
Vertical Adjustment of Torch : 60 mm.