Products – Creative http://www.creativeweldingsolutions.com Welding Solution Mon, 16 Jul 2018 15:38:08 +0000 en hourly 1 https://wordpress.org/?v=4.6.1 CHAMPMIG 250 http://www.creativeweldingsolutions.com/product/champmig-250/ http://www.creativeweldingsolutions.com/product/champmig-250/#respond Sat, 01 Oct 2016 12:12:31 +0000 http://www.creativeweldingsolutions.com/?post_type=product&p=1428
CHAMPMIG 250
Download PDF
Salient Features :
  • Inverter based GMAW outfit
  • High efficiency and high power factor – resulting energy saving
  • Auto “Weld Stop” when welding torch is taken away from weld job
  • Compatible to Power Generator Supply
  • Enhanced Reliability due to SMD technology
  • Digital Panel for adjusting the welding parameters
  • 30% more Energy efficient than conventional machines
  • Maximum Power factor is 0.93
  • Excellent dynamic response enables superior arc characteristics. 2T, 4T operating modes
  • Electronic choke adjustment for better arc control
  • Crater voltage and Crater current adjustment through digital panel
  • Unique feature of Globule Detachment to stop formation of globules at the tip of wire at the end of welding
  • Automatic “Weld Stop” facility
]]> http://www.creativeweldingsolutions.com/product/champmig-250/feed/ 0 Champmulti 400/600 http://www.creativeweldingsolutions.com/product/champmulti-400600/ http://www.creativeweldingsolutions.com/product/champmulti-400600/#respond Tue, 18 Oct 2016 09:58:30 +0000 http://www.creativeweldingsolutions.com/?post_type=product&p=1549 Champmulti 400/600
Salient Features :
  • CHAMP MULTI- 400 and CHAMP MULTI- 600 are Multi process welding outfits with Inverter based welding power source.
  • The IGBT power module, High frequency transformer and fast recovery diode are used as key device for power conversion and transmission to assure better Efficiency and performance.
  • The welding power source has both constant current (CC) and constant voltage characteristics (CV), which are suitable for MMA and MIG/MAG and FCAW applications.
  • Set output parameters are constant against input supply variations.
  • Power source is protected against single phasing, under voltage, over voltage, short circuit and temperature rise.
  • Water cooled version available for CHAMP MULTI 600 as option.
  • MMA process with this outfit is most suitable for all kinds of electrodes including CELWEL for fabrication work, pipe welding, site construction etc.
  • GMAW process is suitable for welding in semiautomatic/ automatic mechanism for welding MS, SS and Al materials with Solid and Flux core wires (FCAW Mode).
  • Both the models can operate with single point Synergic control in MIG/MAG mode.
  • The complete system consists of Power Source, wire feeder, torch and inter connecting cables and control cables between wire feeder and power source.
  • Available with both Gas cooled and Water cooled MIG Torches for 600 Amp model.
  • High efficiency (>85%).
  • Single point Synergic control in GMAW.
  • User friendly Digital front panel and analog remote controller CHAMP MULTI- 400 and CHAMP MULTI- 600 are Multi process
  • Auto “Weld Stop” when welding torch is taken away from work piece.
  • 2T, 4T and SPOT and Multi Spot operating modes in MIG Mode as well as FCAW mode Dynamic Inductance adjustment in GMAW process and Arc force adjustment in MMA process for better arc control.
  • Crater voltage and Crater current adjustment through digital panel.
  • Unique feature of Pinch-off pulse to avoid globule formation.
]]> http://www.creativeweldingsolutions.com/product/champmulti-400600/feed/ 0 CHAMPTIG 300 AD http://www.creativeweldingsolutions.com/product/champtig-300-ad/ http://www.creativeweldingsolutions.com/product/champtig-300-ad/#respond Sat, 01 Oct 2016 12:14:55 +0000 http://www.creativeweldingsolutions.com/?post_type=product&p=1432 CHAMPTIG 300 AD
Salient Features :
  • Large input supply voltage range with under/over voltage
  • ingle phase protection
  • Higher efficiency & power factor
  • Lower power consumption
  • Light weight and compact tig welding system
  • Latest PWM inverter technology
  • In built spot TIG welding facility, AC/DC as well as mixed tig Welding facility. In built pulse TIG welding controls with Independent settings of all parameters from front panel. Optionally welding current variation possible by using remote Control (hand held) or foot control regulator
  • Cleaning width control in ac TIG welding enables user to adjust Oxide cleaning as well as penetration of weld puddle according to his choice
  • Constant current characteristics irrespective of arc length variation
  • High efficiency (≈82%)
  • Smooth and stable arc with spatter less welding
]]> http://www.creativeweldingsolutions.com/product/champtig-300-ad/feed/ 0 CHAMPTIG 300 P http://www.creativeweldingsolutions.com/product/champtig-300-p/ http://www.creativeweldingsolutions.com/product/champtig-300-p/#respond Sat, 01 Oct 2016 12:16:02 +0000 http://www.creativeweldingsolutions.com/?post_type=product&p=1434
CHAMPTIG 300 P
Salient Features :
  • Latest PWM inverter technology
  • IGBT based
  • Smooth and stable arc with spatter less welding
  • HF start ignition High efficiency (>83%) Pulse TIG for precision welding
  • Three phase inverter based, High efficiency and High Power Factor Pulse TIG/ MMA DC Welder
  • Useful for wide variety of material types and thickness Full featured TIG controls possible
  • Power source with built in HF ignition Intelligent protection: over/under voltage, over current/ temperature
  • Option of water cooled Torch with water cooling unit available
]]> http://www.creativeweldingsolutions.com/product/champtig-300-p/feed/ 0 CHAMPTIG 400 P http://www.creativeweldingsolutions.com/product/champtig-400-p/ http://www.creativeweldingsolutions.com/product/champtig-400-p/#respond Sat, 01 Oct 2016 12:17:50 +0000 http://www.creativeweldingsolutions.com/?post_type=product&p=1436 CHAMPTIG 400 P
Salient Features :
  • Latest PWM inverter technology
  • High efficiency (>85%)
  • Smooth and stable arc with spatter less welding
  • Three phase inverter based, High efficiency and High Power Factor Pulse TIG/ MMA DC Welder
  • Useful for wide variety of material types and thickness.
  • Full featured TIG controls possible
  • HF ignition
  • Intelligent protection: over/under voltage, over current / temperature
  • Water cooled Torch with water cooling unit option.
]]> http://www.creativeweldingsolutions.com/product/champtig-400-p/feed/ 0 Core Wires http://www.creativeweldingsolutions.com/product/core-wires/ http://www.creativeweldingsolutions.com/product/core-wires/#respond Sat, 01 Oct 2016 11:52:32 +0000 http://www.creativeweldingsolutions.com/?post_type=product&p=1411 Core Wires

With Manual Metal Arc Welding (MMAW) being extensively used in the heavy steel structures and in industrial fabrication, stainless steel welding wires are one of the sought out product. Stainless steel core wires of Venus Wires Industries Pvt. Ltd., one of the reputed manufacturers, is widely employed in the industries for quality welding. With strict compliance of American Welding Society (AWS) specification, our welding wires are manufactured for SS grades, AISI 307Si, 308L, 308LSi, 309, 309L, 309LSi, 309LMo, 310, 312, 316, 316L, 316LSi, 317L, 318Si, 321, 347, 347Si, 409, 409Cb, 409Ti, 410, 410NiMo, 420, 430, 430LNb, 904L, 2209.

With modern equipments and in-house testing and heat treatment facilities, our single core wires are on par with any other global products. While the cross-sectional diameter of our SS core wire range from 1.60 to 6.00 mm, the length is maintained as per the client specification. Again the wire is packed as per the size and customer specification – either cut lengths are packed in wooden boxes or coil forms are wound on a tubular carrier or HDPE wrapped . As desired by the clients, customized packaging or labeling are also done for the weld core wires.

In CUT LENGTHS & COILS

For Manufacturing of MANUAL METAL ARE WELDING (MMAW) Electrodes

Diameter

mm 1.60 2.00 2.40 3.20 4.00 5.00 6.00
Inch 0.062(1/16) 0.080(5/64) 0.093(3/32) 0.125(1/8) 0.157(5/32) 0.1875(3/16) 0.25(1/4)

 

Grades

307Si, 308L, 308LSi, 309, 309L, 309LSi, 309LMo, 310, 312, 316, 316L, 316LSi, 317L, 318Si, 321, 347, 347Si, 409, 409Cb, 409Ti, 410, 410NiMo, 420, 430, 430LNb, 904L, 2209

]]> http://www.creativeweldingsolutions.com/product/core-wires/feed/ 0 DOUBLE MUSTANG / DOUBLE RACER http://www.creativeweldingsolutions.com/product/double-mustang-double-racer/ http://www.creativeweldingsolutions.com/product/double-mustang-double-racer/#respond Sat, 01 Oct 2016 12:04:09 +0000 http://www.creativeweldingsolutions.com/?post_type=product&p=1418 DOUBLE MUSTANG / DOUBLE RACER
Salient Features :
  • Dynamic output characteristics ensures smooth and uninterrupted arc resulting excellent welding
  • performance througout the entire welding range
  • Provided with input power ON-OFF switch
  • Welder friendly usage – easy to operate since all controls like ON-OFF switch, welding current
  • controlling handle, current scale on the same side i.e. front side
  • Ensures the fine control of welding current to minimise the heat input to the job which reduces the HAZ
  • Light weight and compact transformers with robust construction – Ideal choice for site usage
  • Natural air cooled transformers – coils designed for natural air cooling which eliminates the use of fan and thus risk of coil burning whenever fan fails
  • Specially designed transformer coils with minimum joints and better interlayer insulation eliminates the coil failure and enhances service life of transformer
  • Stepless, infinitely variable current adjustment through sturdy and smooth moving core mechanism
  • Stepless, smooth and infinitely variable current adjustment possible even while welding is in progress
]]> http://www.creativeweldingsolutions.com/product/double-mustang-double-racer/feed/ 0 E-Bond http://www.creativeweldingsolutions.com/product/e-bond/ http://www.creativeweldingsolutions.com/product/e-bond/#respond Sat, 01 Oct 2016 09:33:25 +0000 http://www.creativeweldingsolutions.com/?post_type=product&p=1368 E-Bond
IS Class : E R4121
AWS Code : E6013
Typical Applications :
  • Sheet metal work
  • Storage tanks
  • Vehicles, Railway wagons
  • Shipbuilding, Pipes
  • Steel furniture
  • General structural application
  • Welding IS 2062 and equivalent grades upto 20 mm thick
Key Features :
  • Superior welding characteristics
  • All position electrode
  • Operates at low OCV
  • Ideal for mild steel and low carbon Mn steel with UTS of 430-540 MPa
]]> http://www.creativeweldingsolutions.com/product/e-bond/feed/ 0 E-Bond-M http://www.creativeweldingsolutions.com/product/e-bond-m/ http://www.creativeweldingsolutions.com/product/e-bond-m/#respond Sat, 01 Oct 2016 09:37:29 +0000 http://www.creativeweldingsolutions.com/?post_type=product&p=1374 E-Bond-M
IS Class :
AWS Code : E 6013
Typical Applications :
  • Sheet metal work
  • Storage tanks
  • Steel furniture
  • General fabrication
Key Features :
  • Rutile type coating
  • Specially designed for general purpose fabrication application
  • Superior welding characteristics
  • All position electrode
]]> http://www.creativeweldingsolutions.com/product/e-bond-m/feed/ 0 E-WELMAC 190 http://www.creativeweldingsolutions.com/product/e-welmac-190/ http://www.creativeweldingsolutions.com/product/e-welmac-190/#respond Sat, 01 Oct 2016 12:05:59 +0000 http://www.creativeweldingsolutions.com/?post_type=product&p=1420 E-WELMAC 190
Salient Features :
  • Welding current adjustment possible even while welding is in progress
  • Provided with input power ON-OFF switch
  • Dynamic output characteristics ensures smooth and uninterrupted arc resulting excellent welding performance througout the entire welding range
  • H-class insulation of windings enhances reliability and service life
  • Light weight, compact AC arc welding transformer – easy to mobilise at sites
  • Single phase, natural air cooled transformer with robust construction
  • Most reliable and simple transformer – very convenient and welder friendly to use at sites
  • Infinitely variable current adjustment through sturdy and smooth moving core mechanism
]]> http://www.creativeweldingsolutions.com/product/e-welmac-190/feed/ 0